HDTV Anywhere

HDMI extender | HDMI mains network | Full HD | full house coverage | loopthrough

Recommended retail price € 249.95
  • Watch TV programmes, films and photos from an HDMI device* anywhere in your home, right on your TV/projection screen, in Full HD quality.
  • Connect up to two HDMI (e.g. Decoder, Blu-ray player, mediacenter pc) sources and transmit the signal wirelessly.
  • Any available extra functions such as Video on Demand, Pay TV, Electronic Program Guide, Time Shift and Digital Video Recorder (DVR) remain remotely available and controllable.
  • Plug & Play! Uses your existing power network and eliminates the need to lay cables.
  • Unique SmartLink technology ensures coverage throughout your home.
  • Operate your connected A/V equipment remotely, using the infrared return feature.
  • Through an HDMI splitter built into the transmitter, you can continue to watch your locally connected equipment as well.
  • 100% HDCP compliant.

Watch HDTV at a 2nd location in the home, without laying (additional) cables.

With the HDTV Anywhere, you can transmit the signal from a digital TV decoder, media player and/or Blu-ray player wirelessly. This means you no longer need an additional connection or a decoder/media player for a 2nd TV to watch digital TV in HD quality. Also, when you have a connection downstairs and you want to place your primary TV further away from the connection than what is desirable in terms of cabling, this is a perfect solution. The only thing you need is power, a TV and the HDTV Anywhere.

Because of its large range, the HDTV Anywhere is very suitable for forwarding an HDMI signal to another room in the home. The signal sent by the decoder downstairs is forwarded to a 2nd TV via the HDTV Anywhere. On this TV, you can enjoy digital TV in HD quality. All you need is an electrical outlet to power your TV. If you want to operate your decoder downstairs from the bedroom upstairs, you need the decoder's remote control or you can purchase a universal remote control. 

With the HDTV Anywhere, Marmitek offers a universal solution for watching TV in HD quality in a way that always works, no matter what provider you choose and to which floor you want to send the decoder's signal! In addition, it is possible to connect both a decoder and a media player, which underlines the uniqueness of this product once again.

The product above transmits a copy of the signal to the other room, enabling you to watch the same programme or film at both places. For example, you can continue to watch a film in the bedroom that you started downstairs. If you want to be able to watch other TV channels in the other room, you can connect a 2nd decoder, enabling you to watch independently of each other. 

1/6

Product information

This set contains the following parts :

Transmitter_HDTVA.jpg
1x HD transmitter
Receiver_HDTVA.jpg
1x HD receiver
HDMI kabel.jpg
2x HDMI cable | 150 cm
Infrarood kabel met blaster.jpg
1x Infrared extension cable with blaster LED | 300 cm
1x Infrarood ontvanger.jpg
1x Infrared receiver | 100 cm
Remote Control_HDTV A.jpg
1x Remote control | Batteries included
Voedingskabel _HDTV A.jpg
2x Power cable

Technical specifications

Vergelijk producten
Video resolution 1080p@60/50 Hz, 1080i, 720p, 576p, 480p
PC resolution Max. 1920 x 1080
HDMI standard HDMI, DVI, EDID and HDCP
Audio formats PCM stereo
Power network SmartLink PLC with 500 Mbps PHY rate
Operating range Up to 300 metres SmartLink and up to 200 metres without SmartLink
Latency (delay) < 260ms
infrared frequency range 30 - 60 kHz
Video compression H.264
Quality of Service Smart QoS for video streaming
AV input 2 x HDMI
AV output 1 x HDMI (copy of input)
Infrared output 1 x 2.5 mm jack
Dimensions (h x w x d) 32 x 182 x 97 mm
Weight 262 grams
Output 1 x HDMI
Infrared input 1 x 2.5 mm jack
Dimensions (h x w x d) 32 x 182 x 97 mm
Idle power consumption Switched on 6 Watts and stand-by 4.2 Watts
Power 100 - 240 VAC @50/60 Hz

FAQ

Follow us on
Social Media
 

Stay informed 
via our newsletter

Sign up now