Operate the audio/video equipment (max. 4) in a closed multimedia cabinet with your own remote control.
Works with almost all A/V equipment (HDD-recorder, set-top box, satellite decoder and Stereo) with an infrared sensor
Incorporates new IR filter techniques for use in the vicinity of Flat Screen TVs (Plasma, LCD and LED), indirect sunlight and energy-efficient light
Connect and control multiple appliances, with the cabinet doors shut or out of sight.
Works on 4xAAA battery (not included) or from a mains supply (adapter included).
Compatible with Sky, Sky+ and SkyHD.
How does the Invisible Control work?
Place the Invisible Control in sight of your own remote control. Stick the IR LEDs on the front panel of your A/V equipment. Point the remote control at the Invisible Control in order to operate your A/V equipment via the connected IR LEDs.
Normally, the Invisible Control is in the so-called stand-by mode, to save batteries. By pressing a button on your remote control within a 50 cm range of the receiver, you activate the Invisible Control. A red light on the receiver will flash to confirm the device is activated. If you are using a mains adapter, the Invisible Control will not go into stand-by mode.
After the Invisible Control is activated, it has a range of 4-8 m and a opening angle of 30 degrees. This all depends on the remote control used.
The Invisible Control does not work with Bang & Olufsen (B&O) equipment.
In some cases the receiver can suffer from interference (direct sunlight, IR alarm, tube lighting, energy-saving lights, etc.). In this case you will need to move the receiver slightly, to improve reception.
Is your question still unanswered? Click here for a detailed support request.
Relevant products for the Invisible Control White 4