Smart Solutions at Home
Automatización del Hogar y SeguridadAutomatización del Hogar X-10 Módulos enchufeTM13
Automatización del Hogar y SeguridadAutomatización del Hogar X-10 Módulos enchufeTM13
TM13
RF to X-10 Transceiver and appliance module
 "Le ofrecemos nuestra consulta")
- Módulo de enchufe con receptor para Marmitek mandos a distancia
- Convierte la señal de Marmitek mandos a distancia en señales X-10 en la red de alumbrado
- Módulo de aparato incorporado: encender y apagar la iluminación y aparatos eléctricos a distancia
- Recibe todos los 16 códigos de casa.
Convierte señales de alta frecuencia de Marmitek controladores inalámbricos (mandos a distancia, interruptores y sensores) en señales X-10 en la red de alumbrado. Módulo de aparato incorporado. Cuando se emplean controladores inalámbricos, se necesita ún TM13 por instalación. No se necesita el TM13 cuando está instalado un Marmitek sistema de seguridad inalámbrico.
 "Para más fotos de productos, hace clic aquí")
- Puntos de venta
- Información de producto
- Fotos/Videos
- Descargas
- Accesorios
- Publicaciones
- Preguntas frecuentes
Puntos de venta
Comercios:
Aquí puede ingresar su código postal para buscar tiendas cercas que venden el producto arriba.
→ Contenido del set
→ Especificaciones técnicas
→ Información para pedir
Contenido del set
 "Contenido del set - TM13")
Especificaciones técnicas
 "Especificaciones técnicas - TM13")
Información para pedir
| No. de art. | Enchufe | ||||||||
| 09196 | Enchufe G | ||||||||
| 09198 | Enchufe U | ||||||||
| 09745 | Enchufe Euro | ||||||||
| 09197 | Enchufe F | ||||||||
| 09574 | Enchufe CH | ||||||||
| 09442 | Enchufe I |
Fotos
Accesorios
)
)
)
Tests & Informes
Home Automation in PC Consument
)
(Holandés)
Preguntas frecuentes
That is correct. Only lamp modules will respond to the command ‘All Lights On.’ This is to prevent events such as the coffee machine being turned on by accident. Appliance modules do respond to the command ‘All Units Off’.
Yes. The modules work with both earthed and non-earthed wall sockets.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
That is correct. Only lamp modules will respond to the command ‘All Lights On.’ This is to prevent events such as the coffee machine being turned on by accident. Appliance modules do respond to the command ‘All Units Off’.
Yes. The modules work with both earthed and non-earthed wall sockets.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Check the following:
- Is the load switch turned on?
- Is the HouseCode set to the same letter code as the rest of the system?
- Sometimes it helps to reset the transceiver by taking it out of the wall socket (the transceiver contains software!).
The TM13 is fitted with ‘collision detection’. This prevents problems when more than one TM13 module is used. This can be a problem when you use a TM13 in combination with another X10 transmitter without collision detection.
Marmitek has products in its range for all 230V countries. As different European countries use different plug types, the transceiver modules are available in different versions. The G (German) stands for rim earth (The Netherlands and Germany), the F (French) for pin earth (France and Belgium).
This is perfectly normal. Only lamp modules will respond to the command ‘All Lights On.’ This is to prevent that e.g. the heater is turned on by accident. All modules do respond to the command All Units Off.
No, the UnitCode of the TM13 is fixed to UnitCode Nr. 1. 1
The HouseCode can be set by moving the dial on the front of the module.
- 300W/230V for light bulbs and low voltage halogen lighting with transformer.
- 500W/230V for inductive / capacitive load.
- 1200W/230V for ohmic load.
That is correct. Only lamp modules will respond to the command ‘All Lights On.’ This is to prevent events such as the coffee machine being turned on by accident. Appliance modules do respond to the command ‘All Units Off’.
Yes. The modules work with both earthed and non-earthed wall sockets.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Check the following:
- Is the load switch turned on?
- Is the HouseCode set to the same letter code as the rest of the system?
- Sometimes it helps to reset the transceiver by taking it out of the wall socket (the transceiver contains software!).
This is perfectly normal. Only lamp modules will respond to the command ‘All Lights On.’ This is to prevent that e.g. the heater is turned on by accident. All modules do respond to the command All Units Off.
No, the UnitCode of the TM13 is fixed to UnitCode Nr. 1. 1
The HouseCode can be set by moving the dial on the front of the module.
Is your question still unanswered? Click here for a detailed support request.
)
)
)
)
)
¿Ha encontrado un error? Déjanos saber
© 2013 Marmitek B.V.