SH624
Security and X-10 remote control
 "Can we advise you?")
- Comfort remote control
- Can also be used as X-10 Home Automation remote control
- Improved overview as a result of being able to add text per button
- Wireless control of 16 modules
- Suitable for SafeGuard and TotalGuard.
System remote control for operating SafeGuard and TotalGuard. With partial, full and panic alarms. Also with Marmitek Home Automation functions for operating lighting and equipment. The Home Automation functions also work via the TM13 Transceiver.
 "Click here for more product photos")
Sales points
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
→ Technical specifications
→ Order information
Technical specifications
 "Technical specifications - SH624")
Order information
| Art.no. | |||||||||
| 09170 |
Photos
Accessories
)
Communication of a wireless transmitter/controller to the dimmers/switch modules goes via a transceiver
See the complete serie of transceivers here
)
)
FAQs
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
The range of the remote depends on the local situation, e.g. the number of walls and floors and their construction. The range is usually somewhere between 10 and 20m.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
When you use a remote or sensor, you should have at least one Transceiver or Marmitek X-10 Security Console installed in your house. These components will translate the radio signals to the Marmitek X-10 signal on the power line. Using several remotes and sensors, you only need one central transceiver.
- Switch off all possible disturbing power sources that use a frequency of 433MHz, such as wireless headphones.
- Hold the remote control as high up as possible and aim up.
Is your question still unanswered? Click here for a detailed support request.
)
)
)
)
Found an error on this website? Let us know
© 2013 Marmitek B.V.