Smart Solutions at Home
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersSS13
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersSS13
SS13
Wireless Design wall switch/dimmer
 "Can we advise you?")
- Slimline wireless switch
- Ultra thin stick X-10 switch
- Can be mounted everywhere
- Wireless control of 3 X-10 adresses
- Dimensions: 115 x 70 x 7 mm
Very thin elegant wireless switch. Ideal solution in situations where an extra switch is desired, without running extra wires. Can be attached to walls, glass, doors, tables etc. Sends a high frequency signal through walls and floors. Totally wireless: battery operated. Switches 3 modules and is equipped with a dim function. Use the SS13 as a central control panel for your Marmitek installation!
 "Click here for more product photos")
SS13 (PDF 0.14 MB)
 "Set includes - SS13")
)
Communication of a wireless transmitter/controller to the dimmers/switch modules goes via a transceiver
See the complete serie of transceivers here
)
ss13 en de fr es it nl (PDF 0.20 MB)
 "Technical specifications - SS13")
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
- Check whether the SS13 is set up properly. The best way to do this, is by reassigning the right code to the top button. Consult the SS13 manual for more information. Both the HouseCode and UnitCode are important.
- Is the battery inserted in the right way?
- The SS13 uses a transceiver module (TM13, TM12 or one of the alarm systems). Check whether these work properly, by e.g. using a different remote control.
- Perhaps the range of the SS13 is not sufficient for your situation.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
When you use a remote or sensor, you should have at least one Transceiver or Marmitek X-10 Security Console installed in your house. These components will translate the radio signals to the Marmitek X-10 signal on the power line. Using several remotes and sensors, you only need one central transceiver.
- Check whether the SS13 is set up properly. The best way to do this, is by reassigning the right code to the top button. Consult the SS13 manual for more information. Both the HouseCode and UnitCode are important.
- Is the battery inserted in the right way?
- The SS13 uses a transceiver module (TM13, TM12 or one of the alarm systems). Check whether these work properly, by e.g. using a different remote control.
- Perhaps the range of the SS13 is not sufficient for your situation.
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | |||||||||
| 08937 | |||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
)
)
)
)
)
Found an error on this website? Let us know
© 2012 Marmitek B.V.