Smart Solutions at Home
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersKR22
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersKR22
KR22
Keyfob RF remote control
 "Can we advise you?")
- Wireless Remote Control
- Key ring remote
- Switch the lights on from your car
- Wireless control of 4 modules
A beautiful slim design Remote Control, which you can use to control 4 different addresses, including a dim function. Because of the slim design the KR22 is easy the take with you, for instance on your key chain.
 "Click here for more product photos")
KR22E (PDF 0.14 MB)
 "Set includes - KR22")
)
Communication of a wireless transmitter/controller to the dimmers/switch modules goes via a transceiver
See the complete serie of transceivers here
)
)
kr22 en de fr es it nl (PDF 0.36 MB)
 "Technical specifications - KR22")
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
When you use a remote or sensor, you should have at least one Transceiver or Marmitek X-10 Security Console installed in your house. These components will translate the radio signals to the Marmitek X-10 signal on the power line. Using several remotes and sensors, you only need one central transceiver.
- Switch off all possible disturbing power sources that use a frequency of 433MHz, such as wireless headphones.
- Hold the remote control as high up as possible and aim up.
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | |||||||||
| 09190 | |||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
)
)
)
)
)
Found an error on this website? Let us know
© 2012 Marmitek B.V.