SW12
Shutter switch, MicroModule, on / off / dim
 "Can we advise you?")
- Operate your electric sun blinds, roll down shutters, etc. remotely and/or locally.
- Makes your X-10 system invisible.
- Micromodule with built-in relay with two contacts for connecting a 230V motor.
- Can be operated remotely with an X-10 signal or locally, fully open/closed or on every interim position.
- Invisible installation behind existing switches or wall outlets. Brand and model of the switch can be chosen freely so the SW12 can be used in every interior and installation.
- A 2-way momentary switch with 2 normally open contacts can be connected to this module.
- Lowers, in combination with the CM15Pro™ computer interface, the sun blinds automatically during the day in places where the sun shines inside. This way you protect your furniture against the sunlight, keep the house cool and simulate that you are at home.
- Quick and easy to install and to program.
 "Click here for more product photos")
SW12 (PDF 0.24 MB)
)
)
)
SW12 EN DE FR ES IT NL (PDF 0.76 MB)
 "Technical specifications - SW12")
September 11 2009
Regarding: Home Control
XanuraHome, SW12 introduction, LM12 Softdim Codes, Putting you in de spotlight
Click here to read the entire newsletter...
XanuraHome, SW12 introduction, LM12 Softdim Codes, Putting you in de spotlight
Click here to read the entire newsletter...
No. The module does not respond to these commands.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
The maximum time that can be set is 127 seconds.
Keep pressing the button a little while longer when calibrating the blinds and the blinds are down. Because the load on the motor is bigger when the blinds are opened, it needs a bit more time and it is better to set a longer period for the module.
Yes, the SW12 can be used in place of any normal switch, but you have to replace your normal switch with a momentary switch with two normally open contacts
In connection with heat development, it is not permitted for numerous MicroModules to be used in ONE wall outlet.
No. The module does not respond to these commands.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
No. The module does not respond to these commands.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Keep pressing the button a little while longer when calibrating the blinds and the blinds are down. Because the load on the motor is bigger when the blinds are opened, it needs a bit more time and it is better to set a longer period for the module.
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | |||||||||
| 09842 | |||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
)
)
)
Found an error on this website? Let us know
© 2012 Marmitek B.V.