SWM1P
Shutter switch, MicroModule, on / off / dim
 "Can we advise you?")
- Operate your electric sun blinds, roll down shutters, etc. remotely and/or locally
- Micromodule with built-in relay with two contacts for connecting a 230V motor.
- Can be controlled remotely with every X-10 signal (also simultaneously multiple modules). Of course local operation also remains possible.
- Invisible installation behind existing switches or wall outlets. Brand and model of the switch can be chosen freely so the SWM1P can be used in every interior and installation.
- Equipped with a preset function; a position for rolling down shutters (for instance a day-/ventilation position) which can be pre-set.
- Local blocking position for blocking the motor during for instance cleaning of the windows or maintenance.
- Lowers, in combination with the CM15Pro™ computer interface, the sun blinds automatically during the day in places where the sun shines inside. This way you protect your furniture against the sunlight, keep the house cool and simulate that you are at home.
- Quick and easy to install and to program.
 "Click here for more product photos")
SWM1P (PDF 0.27 MB)
)
)
)
 "Technical specifications - SWM1P")
SWM1P on AutomatedHome.co.uk
)
(English)
No. The module does not respond to these commands.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
During the programming of the address, a one second pause is needed between both “ON” commands. When these commands are given too quickly one after the other, the address shall not be programmed.
In connection with heat development, it is not permitted for numerous MicroModules to be used in ONE wall outlet.
No, the FD10 only works as a phase coupler for modules which transmit at 0.60 and 120 degrees. You need the CAT4000 /FKX40 for this module. This also strengthens the signal on all phases.
No. The module does not respond to these commands.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
No. The module does not respond to these commands.
Yes, you can use more than one Transceiver in your home when the range of your remotes is not sufficient. The Transceiver is using so called collision detection to prevent signals to be disturbed when more than one Transceiver is transmitting. Transceivers will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the units are placed as far away from each other as possible.
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | |||||||||
| 09779 | |||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
)
)
)
Found an error on this website? Let us know
© 2012 Marmitek B.V.