DoorGuard 400
LCD Colour Door Phone System
 "DoorGuard 400 - LCD Colour Door Phone System")
 "Can we advise you?")
- See who’s at the door, a safe feeling!
- Luxurious design; neat looks and provided with a 14cm colour LCD screen.
- Small, subtle, vandalism-resistant doorbell camera.
- Always perfect sound and clear picture, also in the dark.
- Easy installation and the camera fits on any narrow doorframe. No sawing or chipping required.
How does it work?
You install the small doorbell camera onto the doorframe and connect the wires. As soon as a visitor rings your doorbell, the picture will get displayed on the home monitor. This way you see who is at the door before you open it (or pretend you’re not at home). To speak to the caller, you simply press on the speech button. If you have also installed an electric door opener, you can open the door with the help of the monitor. If you have installed more monitors (optionally available) at home (maximum 3 extra), then you can also talk among each other (intercom).
 "Click here for more product photos")
DoorGuard400 (PDF 0.23 MB)
 "Set includes - DoorGuard 400")
DoorGuard 300 Extra Monitor
Extra monitor for Hands Free Video Door Phone System
- Extra monitor for other rooms
- Intercom function between monitors
- You can connect up to 3 other monitors to the basic set.
)
DoorGuard 400 Extra Monitor
Extra monitor for LCD Colour Door Phone System
- Extra monitor for other rooms
- Intercom function between monitors
- You can connect up to 3 other monitors to the basic set.
)
Wall bracket for camera
for DoorGuard300/400
- Wall bracket for camera
- To be able to mount your DoorGuard300/400 camera in the corner of the door frame.
)
Universal Electric Door Opener
for most door phones
- Universal Electric Door Opener
- Universally installable on most doorframes.
- Delivered with 2 stainless steel faceplates.
- Suitable for installation on right hand and left hand doors.
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
doorguard400 en de fr es it nl (PDF 0.25 MB)
 "Technical specifications - DoorGuard 400")
November 23 2007
Regarding: Door phones
Marmitek launches new DoorGuard in successful series
Click here to read the entire newsletter...
Marmitek launches new DoorGuard in successful series
Click here to read the entire newsletter...
September 11 2007
Regarding: DoorGuard 400
Knowing who’s at the door; a safe feeling.
Click here to read the entire newsletter...
Knowing who’s at the door; a safe feeling.
Click here to read the entire newsletter...
DoorGuard400 op AV Domotica.nl
)
(Dutch)
DoorGuard400 on AutomatedHome.co.uk
)
(English)
DoorGuard400 in Home Emotion
)
(Dutch)
From the main monitor you go to the extra monitor with a 2 wire connection:
- L+ on the main monitor must be connected with L+ on the extra monitor.
- L- on the main monitor must be connected with L- on the extra monitor.
In this way you may go on to a possible next extra monitor.
The monitor of the DoorGuard is provided with a potential-free contact, to connect a door lock (NO – normally open). A door lock should therefore be provided with its own power supply. The maximal load is DC24V/1A of AC24V/1A.
Yes, this is possible. However the image on the DG100/DG300 extra monitor will be B/W, because these are B/W monitors.
The electric door lock should be in series with the power supply on the L+ and L- connections. The L+ and L- connections are only switch contacts and do not power your electric door lock.
- Up till a cable-length of 25 meters, you can use a 4 core cable of minimum 4x 0.55mm2.
- For cable-lengths of 25~50 meters, you need to use a coax cable, 75 ohms of 0.5mm2 (R1 and R2) for the video signal.
- For cable-lengths of 50~100 meters, use a 75 ohms coax cable of minimum 1.0mm2.
- For cable-lengths of 100~300 meters, use a 75 ohms coax cable of minimum 1.5mm2.
There is no coax cable required for the audio signal, and a 2 core cable is sufficient.
- Check the connection.
- The door-opener button works only when you also have image from the camera. When the camera is still off, the push-button won’t work. This is to prevent that you open the outside door by accident.
The electric door lock should be in series with the power supply on the L+ and L- connections. The L+ and L- connections are only switch contacts and do not power your electric door lock.
- Check the connection.
- The door-opener button works only when you also have image from the camera. When the camera is still off, the push-button won’t work. This is to prevent that you open the outside door by accident.
The monitor of the DoorGuard is provided with a potential-free contact, to connect a door lock (NO – normally open). A door lock should therefore be provided with its own power supply. The maximal load is DC24V/1A of AC24V/1A.
Yes, this is possible. However the image on the DG100/DG300 extra monitor will be B/W, because these are B/W monitors.
The IP value is 32
After activating the monitor, you have around one and a half minutes of image.
Possibly you have accidentally pushed the 'intercom' button. Use the round 'monitor' button to answer calls. The 'intercom' button is only for calls between the main monitor and extra inside monitors.
No, privacy considerations mean that you first have to press a button on the monitor. Two-way communication is then activated.
- Up till a cable-length of 25 meters, you can use a 4 core cable of minimum 4x 0.55mm2.
- For cable-lengths of 25~50 meters, you need to use a coax cable, 75 ohms of 0.5mm2 (R1 and R2) for the video signal.
- For cable-lengths of 50~100 meters, use a 75 ohms coax cable of minimum 1.0mm2.
- For cable-lengths of 100~300 meters, use a 75 ohms coax cable of minimum 1.5mm2.
There is no coax cable required for the audio signal, and a 2 core cable is sufficient.
Yes, you can. Also from the extra monitors you have full function.
The button for the door opener only works if you also have a picture from the camera. If the camera is still switched off, the button will not work. This is to prevent that you open your front door by accident.
To check this, the red LED besides the button will always flash if you open the front door by pressing the button. If the camera is not switched on, the LED will not be activated by pressing the button for the door opener.
- Check the connection.
- The door-opener button works only when you also have image from the camera. When the camera is still off, the push-button won’t work. This is to prevent that you open the outside door by accident.
Possibly you have accidentally pushed the 'intercom' button. Use the round 'monitor' button to answer calls. The 'intercom' button is only for calls between the main monitor and extra inside monitors.
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | Plugtypes | ||||||||
| 09741 | Europlug | ||||||||
| 09742 | UK plug | ||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
)
)
)
)
)
)
Found an error on this website? Let us know
© 2012 Marmitek B.V.