MegaView 61
HDMI extender over CAT5 + IR Return signal
 "Can we advise you?")
- Watch your HD Content elsewhere on your TV
- Watch films, look at photographs and listen to music from, for example, your Media Centre PC, Blu-Ray player, game console, set top box or hard-disk recorder on a different TV/projection screen in perfect HD quality.
- Operate your connected A/V equipment remotely via the infrared return signal.
- Wired signal transmission up to 100 metres!
- Save a lot of money on expensive HDMI cabling.
- Retention of Full HD 1080p image and sound quality for up to 60 metres.
- Free from interruption due to solid metal, interference-free housing.
- Very simple to install or add into an unused CAT5 network.
 "Click here for more product photos")
Alles over AV overdracht over CAT5 kabel (PDF 0.04 MB)
Alles zur AV Ubertragung uber CAT5 Kabel (PDF 0.04 MB)
Everything about AV transmission through CAT5 cable (PDF 0.04 MB)
MegaView61 (PDF 0.54 MB)
 "Set includes - MegaView 61")
)
MegaView6061 EN DE FR ES IT NL (PDF 0.58 MB)
 "Technical specifications - MegaView 61")
November 05 2009
Regarding: MegaViews
Effortlessly transfer all the channels from your digital TV subscription to your bedroom
Click here to read the entire newsletter...
Effortlessly transfer all the channels from your digital TV subscription to your bedroom
Click here to read the entire newsletter...
Megaviews in Home Emotion
)
(Dutch)
Megaviews in Home Emotion 2
(Dutch)
MegaView60-61 op ComputerTotaal.nl
)
(Dutch)
MegaView50-51-60-61 in digitalMarkt
)
(German)
MegaView61 on Automated Home.co.uk
)
(English)
MegaViews op elektropraktijk.nl
)
(Dutch)
MegaViews op Hifi.nl
)
(Dutch)
MegaView50-51-60-61 in ComputerIdee
)
(Dutch)
MegaViews op HDTV nieuws.nl
)
(Dutch)
- Ensure that the CAT5e/6 cables are connected correctly between the MegaView60/61 transmitter and receiver (CAT5e-1 to CAT5e-1 and CAT5e-2 to CAT5e-2).
- Check if the A/V device is switched on.
- Use only CAT5e/CAT6 cable as specified:
-
- UTP-, FTP- or STP-cable
-
- 24AWG or lower
-
- Solid twisted pair
-
- 100 ohm at 1MHz
-
- RJ-45 jack according to EIA/TIA T568B standard
-
- Instead of CAT5e cable, CAT6 cable may also be applied (this offers better quality). Use a ‘solid twisted pair CAT-5e or CAT-6 cable’ in order to optimise transfer quality.
-
- Check if the CAT5e/CAT6 cable provides a solid connection (no cable faults).
- Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.
- Please ensure that the maximum cable length is not exceeded.
- Install your system as far away from any RF sources (wireless devices) as possible.
- Set a low resolution on your HDMI source. The CAT5e/6 cable used probably cannot deal with the higher resolution bandwidth.
- Ensure that the CAT5e/6 cables are connected correctly between the MegaView60/61 transmitter and receiver (CAT5e-1 to CAT5e-1 and CAT5e-2 to CAT5e-2).
- Check if the A/V device is switched on.
- Use only CAT5e/CAT6 cable as specified:
-
- UTP-, FTP- or STP-cable
-
- 24AWG or lower
-
- Solid twisted pair
-
- 100 ohm at 1MHz
-
- RJ-45 jack according to EIA/TIA T568B standard
-
- Instead of CAT5e cable, CAT6 cable may also be applied (this offers better quality). Use a ‘solid twisted pair CAT-5e or CAT-6 cable’ in order to optimise transfer quality.
-
- Check if the CAT5e/CAT6 cable provides a solid connection (no cable faults).
- Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.
- Please ensure that the maximum cable length is not exceeded.
- Install your system as far away from any RF sources (wireless devices) as possible.
- Set a low resolution on your HDMI source. The CAT5e/6 cable used probably cannot deal with the higher resolution bandwidth.
- IR Receivers have a reception sensitivity of approx. 6 meters at a 90 degrees angle of aperture. Range is also dependent on the remote control used.
- Check if the power adapter has been connected to the MegaView61 transmitter
- Please ensure that the IR receiver and the IR extender cable have been connected properly and that they are fully plugged in.
- Please ensure that the LEDs of the IR extender cable are placed correctly to the infrared sensor of the A/V device, this has to be done very precisely. The exact position can be found easily by shining at it with a flashlight.
If none of the options above offers the solution, your remote control probably uses a different infrared frequency. Instead of the standard 38 kHz receiver you can also order a 56 kHz receiver (art. no. 09883).
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | Plugtypes | ||||||||
| 09881 | Europlug | ||||||||
| 09882 | UK plug | ||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
)
)
)
)
)
)
)
)
)
)
Relevant products for the MegaView 61
GigaView 820
Wireless Full HD Audio/Video Sender
- Connect, split and replace your HDMI cable wirelessly.
- Watch up to 2 HD devices elsewhere in your home.
- Mount the receiver (out of sight) behind your HDTV or on the ceiling next to your projector. No more visible cables.
- The built-in HDMI splitter means that you can also connect an HDTV to the Transmitter so that you can continue to watch the connected devices locally.
- The HD signal does not experience any delays and is therefore perfect for game consoles.
- Digitally supports all 480p, 720p, 1080i and 1080p (Full HD) resolutions from up to 30 metres.
- Sends the HD signal uncompressed.
)
){kind=link}
Found an error on this website? Let us know
© 2012 Marmitek B.V.