MegaView51
Composite Audio/Video extender over CAT5 + IR Return signal
- Watch and operate the content of your Media Centre PC or Settop box elsewhere on your TV.
- Watch films, look at photographs and listen to music from your Media Centre PC or watch the images from, for example, your hard disk recorder, settop box or surveillance camera on a different TV or projection screen.
- Operate your connected A/V equipment remotely via the infrared return signal.
- Wired Audio and Video transmission as far as 300 metres!
- Optimum price/quality ratio as a result of using CAT5e/CAT6 cabling.
- High quality, Gold Plated connectors for maintaining image and sound quality.
- Very simple to install or add into an unused CAT5 network, just one cable for the complete A/V signal.
 "Click here for more product photos")
)
)
)
)
)
)
)
alles over AV overdracht over CAT5 kabel (PDF 0.03 MB)
Alles zur AV Ubertragung uber CAT5 Kabel (PDF 0.03 MB)
everything about AV transmission through CAT5 cable (PDF 0.03 MB)
MegaView51 (PDF 0.16 MB)
 "Set includes - MegaView51")
S-video to composite video adapter
- Transmit the S-video signal into a composite video signal
- Connect a Marmitek video transmitter to your PC with S-video connection
)
){kind=link}
){kind=link}
MegaView5051 en de fr es it nl (PDF 1.02 MB)
 "Technical specifications - MegaView51")
November 05 2009
Regarding: MegaViews
Effortlessly transfer all the channels from your digital TV subscription to your bedroom
Click here to read the entire newsletter...
Effortlessly transfer all the channels from your digital TV subscription to your bedroom
Click here to read the entire newsletter...
Megaviews in Home Emotion
)
Megaviews in Home Emotion 2
MegaView50-51-60-61 in digitalMarkt
)
MegaViews op elektropraktijk.nl
)
MegaViews op Hifi.nl
)
MegaView50-51-60-61 in ComputerIdee
)
MegaViews op HDTV nieuws.nl
)
- Check if all cables are connected properly.
- Check if the A/V device is switched on.
- Use only CAT5 cable as specified in chapter 3 (CAT5e Cable Requirements).
- Check if the CAT5 cable provides a solid connection (no cable faults).
- Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.
- Please ensure that the maximum cable length is not exceeded.
- Check if the cinch cables on the A/V device, the screen and the MegaView50/51 have been connected to the correct colours.
- Install your system as far away from any RF sources (wireless devices).
- Check if all cables are connected properly.
- Check if the A/V device is switched on.
- Use only CAT5 cable as specified in chapter 3 (CAT5e Cable Requirements).
- Check if the CAT5 cable provides a solid connection (no cable faults).
- Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.
- Please ensure that the maximum cable length is not exceeded.
- Check if the cinch cables on the A/V device, the screen and the MegaView50/51 have been connected to the correct colours.
- Install your system as far away from any RF sources (wireless devices).
- Both the built-in and the surface-mounted IR Receivers have a reception sensitivity of approx. 10 meters at a 90 degrees angle of aperture. Range is also dependent on the remote control used. The IR reception indicator LED in the IR receiver will light up on reception of an IR signal.
- Check if the power adapter has been connected to the MegaView51 transmitter
- Please ensure that the IR receiver and the IR extender cable have been connected properly and that they are fully plugged in.
- Please ensure that the LEDs of the IR extender cable are placed correctly to the infrared sensor of the A/V device, this has to be done very precisely. The exact position can be found easily by shining at it with a flashlight.
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | Plugtypes | ||||||||
| 09873 | Europlug | ||||||||
| 09874 | UK plug | ||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
Found an error? Let us know
© 2010 Marmitek B.V.