Invisible Scart200
2.4 GHz Single-Room Wireless Audio/Video Scart to Scart
 "Invisible Scart200 - 2.4 GHz Single-Room Wireless Audio/Video Scart to Scart")
- Wireless sound and vision to your TV screen
- Wireless replacement of the scart cable.
- Place your TV screen wherever you want; no long or thick scart cable in plain view anymore.
- Control your DVD player, VCR, satellite receiver, decoder, etc. from any angle, even through a wall or cabinet door, using the freely placeable IR receiver.
- Easy to install. The compact transmitter and receiver with a smart swivel scart fit behind any A/V device and TV screen, directly on the scart input.
How does the Invisible Scart 200™ work?
It's really simple! The set consists of a scart transmitter, a scart receiver and an infrared extender. Connect the transmitter to your A/V device (e.g. DVD player). Then connect the receiver to your TV. Via the infrared extender, you can continue to control A/V devices that are set up in a different room (or in a closed cupboard) with your own remote control.
 "Click here for more product photos")
)
)
)
)
)
Invisible Scart200 (PDF 0.18 MB)
 "Set includes - Invisible Scart200")
2.4 GHz Extra Scart Receiver
for your 2.4 GHz Audio/Video system
- Extra scart receiver for Invisible Scart 200/300, GigaView345, GigaVideo80 or TV Anywhere2,4GHz
- Easy to install. The compact receiver with a smart swivel scart fits behind any TV screen, directly on the scart input.
- Receive the signal of your transmitter on more than one appliance
)
InvisibleScart200 EN DE FR ES IT NL (PDF 0.63 MB)
 "Technical specifications - Invisible Scart200")
Invisible Scart 200-300 op Hifi.nl
)
Invisible Scart op ElectronicHouse
)
Invisible Scart on AutomatedHome.co.uk
)
Invisible Scart200-300 auf Digital Fernsehen.de
)
Invisible Scart in Televizier
)
Invisible Scart op TVJoost.nl
)
Wireless AV transmitters on technologeek.com
)
Invisible Scart in De Digitale Krant
)
Invisible Scart in HifiVidéo
)
Follow these instructions:
- Take into account that depending on the local circumstances the 2,4 GHz signal reaches further through floors en walls than the 433 MHz signal of the infrared return signal. You could test with shorter distances
- Is the IR-extension-cable with 3 LED's connected correctly to the InvisibleScart -transmitter?
- Is the IR LED (eye) of the IR extension cable applied correctly and in the right place on the IR window of your equipment? Often transferring the transmitter or receiver offers a solution. Even 30 cm to the left or to the right can make a large difference. Experiment with the position for the best operation.
- Are the batteries correctly placed in the IR receiver? When placing the batteries pay attention to the polarity (+/-). This is indicated on the inside of the IR receiver.
Your video transmitter set can send analogue stereo signals, such as for example Dolby Surround. Digital systems such as for example Dolby 5.1 or Dolby Digital cannot be sent.
Yes. However, the signal will be the same on all receivers.
No, it is only possible to send a composite video signal (CVBS). rn rn
Yes this is possible, provided your beamer has a composite SCART video-input
The infrared return channel is used to control equipment on the transmitter end from the receiver end. This means you can watch TV on a second monitor without having to use extra wires. You can use the decoder as a TV tuner. By using the remote control of the decoder with the receiver, you can change the channels on the decoder.
Both systems work on the same frequency band (2, 4 GHz). It is therefore possible that interference will occur. However, the Invisible Scart™ has several channels within the frequency band. This will probably also is the case with your WLAN. Pay attention in the case of so-called frequency hopping. In that case, different channels are selected all the time, which might cause interference after all
Your video transmitter set can send analogue stereo signals, such as for example Dolby Surround. Digital systems such as for example Dolby 5.1 or Dolby Digital cannot be sent.
Follow these instructions:
- Take into account that depending on the local circumstances the 2,4 GHz signal reaches further through floors en walls than the 433 MHz signal of the infrared return signal. You could test with shorter distances
- Is the IR-extension-cable with 3 LED's connected correctly to the InvisibleScart -transmitter?
- Is the IR LED (eye) of the IR extension cable applied correctly and in the right place on the IR window of your equipment? Often transferring the transmitter or receiver offers a solution. Even 30 cm to the left or to the right can make a large difference. Experiment with the position for the best operation.
- Are the batteries correctly placed in the IR receiver? When placing the batteries pay attention to the polarity (+/-). This is indicated on the inside of the IR receiver.
Yes, this is the RX570 (08920) or the IR Eye™ (09682)
The infrared return channel is used to control equipment on the transmitter end from the receiver end. This means you can watch TV on a second monitor without having to use extra wires. You can use the decoder as a TV tuner. By using the remote control of the decoder with the receiver, you can change the channels on the decoder.
Yes, this is the RX570 (08920) or the IR Eye™ (09682)
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | Plugtypes | ||||||||
| 09716 | Europlug | ||||||||
| 09717 | UK plug | ||||||||
Shops:
Here you can enter your postcode to see which shops sell the product in your local area.
Relevant products for the Invisible Scart200
Invisible Scart300
2.4 GHz Wireless Audio/Video to Scart
- The compact receiver with a smart swivel scart fits behind any TV screen, directly on the scart input.
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
Found an error? Let us know
© 2010 Marmitek B.V.