Smart Solutions at Home
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersIRRF7243
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersIRRF7243
IRRF7243
Minicontroller / IR and RF to X-10 Transceiver
- Control panel for switching and dimming almost all your electrical appliances.
- Controls Marmitek X10 modules via the existing mains.
- Can be used directly by pressing the buttons on the Mini Controller/Transceiver (e.g. On/Off, Dim, All Off, etc.).
- Can be controlled using an X10 compatible infra-red remote control (e.g. Marmitek EasyControl4 en 6, EasyTouch25, Easy Icon10RF, Philips Pronto, some One for All models, etc.).
- Can be controlled wirelessly using an X10 RF signal (e.g. Marmitek RF remote control Easy Icon10RF, EasyControl8RF and EasyTouch35, Marmitek wall switch SS13, Marmitek motion detector MS13, etc.)
- Receives all 16 Housecodes
The IRRF 7243 is a very nifty control panel for switching appliances and lights on and off. Everything can be controlled in combination with Marmitek X10 modules, easy and without the need for extra wires. Ideal for switching off all the lights before going to bed, switching on an outdoor lamp or switching off TVs. Compatible with and extendable with all Marmitek X10 modules.Transfer infra-red and high-frequency signals from Marmitek wireless controllers (remote controls, wireless switches and wireless sensors) to the Marmitek X-10 protocol on the mains.
 "Click here for more product photos")
)
)
)
)
IRRF7243 en de fr es it nl (PDF 0.48 MB)
 "Technical specifications - IRRF7243")
Yes, the IRRF7243 enables you to control Marmitek X-10 equipment via an infrared signal.
Yes, you can directly drive the IRRF7243 or the TM13 with the Pronto RF signal.
The IR-RF7243 can be set to HouseCode P. In this setting all HouseCodes are transmitted. This only works with the Philips Pronto.
Is the switch [1 … 4/5 …8] set to the wrong setting?rn rn
Is the switch [1 … 4/5 …8] set to the wrong setting?rn rn
These can be found on e.g. http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=pronto&db=devices
We do not offer any support in programming the Pronto.
The IRRF7243 also has RF reception, just like the TM13.
You can use an unlimited number of IRRF7243 units, to e.g. transmit commands from different locations with your infra-red remote control or to increase the range of your RF remote control.
Yes, the IRRF7243 enables you to control Marmitek X-10 equipment via an infrared signal.
Yes, you can directly drive the IRRF7243 or the TM13 with the Pronto RF signal.
The IR-RF7243 can be set to HouseCode P. In this setting all HouseCodes are transmitted. This only works with the Philips Pronto.
This is normal. Only lamp modules will respond to the command ‘All Lights On’. This is to prevent that e.g. the coffee machine is activated in case of an alarm. The command ‘All Units Off’ is recognised by all device modules.
Is the switch [1 … 4/5 …8] set to the wrong setting?rn rn
The following remote controls can be used together with the IR-RF7243:
- Marmitek 8in1 Silver
- Marmitek 8in1 Zwart
- Marmitek 4in1
- Marmitek 6in1
- Marmitek EasyControl 4
- Marmitek EasyControl 6
- Marmitek EasyControl 8
- Marmitek EasyTouch 25
- Marmitek EasyTouch 35
- Marmitek PC Control
- Marmitek EasyIcon10RF
- Some Fox models
- Some One for All models
- Philips/Marantz Pronto (Marmitek X-10 IR codes for the Pronto can be found on the Internet)
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | Plugtypes | ||||||||
| 09688 | Europlug | ||||||||
| 09689 | UK plug | ||||||||
Found an error? Let us know
© 2010 Marmitek B.V.