Smart Solutions at Home
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersMS13
Home Automation & SecurityX-10 Home AutomationTransmitters and controllersMS13
MS13
Indoor and outdoor Motion sensor
- Wireless motion sensor
- Ideal when you're on holiday: simulates your presence
- Reacts to movement: always or only when it is dark
- Built-in light/dark sensor
- Off command after adjustable time
- Settings will not be lost while replacing batteries
Switches lights and appliances on while present and switches them off later. Switches outdoor and indoor lights on when you come home in the evening. Saves energy by automatically switching lights and appliances off in empty rooms. Protects your home by early detection of unexpected visitors. Automatically route lights to the bathroom, for instance. Completely wireless. Splash waterproof for inside and outside use.
 "Click here for more product photos")
)
)
)
)
Communication of a wireless transmitter/controller to the dimmers/switch modules goes via a transceiver
See the complete serie of transceivers here
)
)
ms13 en de fr es it nl (PDF 0.27 MB)
 "Technical specifications - MS13")
Home Automation in PC Consument
)
Yes, you can use more than one TM13 Transceiver in your home when the range of your remotes is not sufficient. The TM13 is using so called collision detection to prevent signals to be disturbed when more than one TM13 is transmitting. TM13’s will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the TM13 units are placed as far away from each other as possible.
You are waiting too long in between the separate steps of the setup procedure. The sensor will switch to standby.
Yes, you can use more than one TM13 Transceiver in your home when the range of your remotes is not sufficient. The TM13 is using so called collision detection to prevent signals to be disturbed when more than one TM13 is transmitting. TM13’s will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the TM13 units are placed as far away from each other as possible.
Yes, the MS13 is splash-waterproof.
Yes, you can. See the manual for more information.
Yes, you can use more than one TM13 Transceiver in your home when the range of your remotes is not sufficient. The TM13 is using so called collision detection to prevent signals to be disturbed when more than one TM13 is transmitting. TM13’s will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the TM13 units are placed as far away from each other as possible.
When you use a remote or sensor, you should have at least one TM13 Transceiver or Marmitek X-10 Security Console installed in your house. These components will translate the radio signals to the Marmitek X-10 signal on the power line. Using several remotes and sensors, you only need one central transceiver.
Yes, the MS13 is splash-waterproof.
Is your question still unanswered? Click here for a detailed support request.
| Art.no. | |||||||||
| 09053 | |||||||||
Found an error? Let us know
© 2010 Marmitek B.V.